Your Guide To Radon Testing In Milwaukee

Radon is a gas which is tasteless, colorless and odorless gas that’s amassed due to the breakdown of uranium found in the ground and water bodies. Radon exits the ground via cracks in the foundation and ends up accumulating in the building.

Radon testing Milwaukee

Radon testing in Milwaukee is both done privately by local companies and is a service provided by certified contractors of The Wisconsin Department Of Health Services.

 Testing methods available for Radon Testing In Milwaukee

 Radon Testing In Milwaukee is available in two formats for the residents to avail-

  1. Passive Radon Testing
  2. Active Radon Testing

The Wisconsin Department Of Health Services issues The Environment Protection Agency certified passive radon testing devices for residents of Milwaukee for self-testing. It consists of detectors,charcoal canisters, and a charcoal liquid scintillation device that are left in the house for a set duration, then sent to a laboratory for testing.

Active Radon testing consists of a number of detectors and monitors which continuously monitor radon levels in the surroundings. For this type of radon testing In Milwaukee, Residents should approach their local air quality professionals and companies.

Radon testing in Milawakee tests takes 90 days, but if time is an issue for residents, they can resort to a short term test, which can take from 46 to 96 hours.

 Why test for radon

 The Wisconsin Department Of Health Services made a statement informing that the gas is a leading reason for lung cancer. Studies, point out that radon is especially bad for chain smokers, as it puts them at high risk of cancer. Even nonsmokers have an elevated chance.

So if you are a new home buyer in Milwaukee, make sure you look up the regional radon map to see the area’s radon concentration. Existing residents should make sure they have countermeasures deployed, to minimize the risk of lung cancer in the family

 Radon testing MilwaukeeWhat to do if radon levels are above safe levels

If radon testing yields unhealthy amounts of radon. One can opt for the following methods to reduce the concentration.

  1. filling cracks and holes in Foundations of buildings is one of the primary ways to ensure no radon is escaping into the building. But it is not cost-efficient because it is nearly impossible to find every crack.
  2. Natural and artificial ventilation is a cheap and efficient way. Letting air flow through the structure either via windows or exhaust fans makes sure that the amount of radon in the structure is minimized.
  3. a gas permeable layer allows the soil gases to freely flow below the foundation of the structure and not accumulate in the building the building. These gases can then be exhausted out using a vent pipe.
  4. Specialized Radon Reduction Systems, which are certified by the EPA should be installed in buildings by builders. It is the most efficient way to get rid of radon from the structure.
  5. House pressurization can also be done. In this method, the pressure inside the building is increased via fans and blowers, which prevents radon from entering the building.